在线国产观看-在线国产高清-在线国产福利-在线国产二区-在线国产91-在线观影

東莞市創億嘉潤滑油有限公司 服務熱線:0769-81283290 13725804996
快捷 高效 周到 貼心 全心全意為客戶服務 工業潤滑油、工業潤滑脂、工業潤滑劑咨詢熱線:13725804996 電話:0769-81283290
美孚潤滑油 殼牌潤滑油 嘉實多潤滑油
BP潤滑油 福斯潤滑油 加德士潤滑油
克魯勃潤滑油 道達爾潤滑油 埃索潤滑油
協同潤滑油 出光潤滑油 摩托瑞斯潤滑油
  • 東莞創億嘉潤滑油有限公司

    電話:0769-81283290

    聯系人:劉超

    手機:13725804996

    企業QQ:1352876343

    郵箱:1352876343@qq.com

    網址:www.110mswg.cn

    地址:廣東省東莞市南城區高新產業園區宏一路

    郵編:523073

聯系方式
殼牌潤滑油系列 > 殼牌航空潤滑油 > AEROSHELL FLUID 31
AEROSHELL FLUID 31 詳細說明 (瀏覽1452次)
AEROSHELL FLUID 31
AeroShell Fluid 31 is a synthetic hydrocarbon based aircraft hydraulic fluid
with greatly improved fire resistance characteristics when compared with
conventional petroleum products.
AeroShell Fluid 31 has a specially designed base stock which imparts a
relatively high flash point, excellent low temperature properties and good
oxidation and thermal stability. In addition, AeroShell Fluid 31 is formulated
with high technology additives to provide oxidation and corrosion
resistance, antiwear, and anti-foaming protection.
AeroShell Fluid 31 is superclean filtered to ensure optimum performance in
particulate monitored systems.
AeroShell Fluid 31 is dyed red.
The useful operating temperature range is –40 to +205°C.
APPLICATIONS
AeroShell Fluid 31 is recommended for use in aircraft, ordnance, and
missile systems operating from –40°C to +205°C . This fluid should be
considered for use in auto pilots, shock absorbers, brakes, flight control
systems, hydraulic servo-controlled systems and other systems using
synthetic elastomer seals.
An increasing number of aircraft manufacturers now recommend use of this
type of fluid in aircraft hydraulic systems in preference to mineral hydraulic
oils. This move has been prompted by need to use fluids with better fire
resistant properties.
AeroShell Fluid 31 is also approved for use in the Honeywell (formerly
Garrett) cooling turbine (cabin air compressors).
Increasingly this type of hydraulic fluid is being adopted for use in
hydraulic systems of military aircraft in place of mineral hydraulic fluids.
AeroShell Fluid 31 is a synthetic hydrocarbon oil and should not be used in
contact with incompatible seal materials. Refer to the General Notes at the
front of this section for further information.
AeroShell Fluid 31 is compatible with AeroShell Fluids 4, 41, 51, 61 and
71 and can be used in systems designed to operate with MIL-PRF-5606,
MIL-PRF-6083, MIL-PRF-87257 and MIL-PRF-46170 fluids.
Chlorinated solvents should not be used for cleaning hydraulic components
which use AeroShell Fluid 31. The residual solvent contaminates the
hydraulic fluid and may lead to corrosion.
www.shell.com/aviation
190
Hydraulic Fluids
SPECIFICATIONS
U.S. Approved MIL-PRF-83282D
British (MIL-PRF-83282D)
French Equivalent to DCSEA 437/A
Russian –
NATO Code H-537
Joint Service Designation OX-19
PROPERTIES MIL-PRF-83282D TYPICAL
Oil type Synthetic Synthetic
Hydrocarbon Hydrocarbon
Kinematic viscosity mm
2
/s
@ 205°C 1.0 min 1.07
@ 100°C 3.45 min 3.53
@ 40°C 14.0 min 14.33
@ –40°C 2200 max 2098
Flashpoint
Cleveland Open Cup °C 205 min 237
Fire Point °C 245 min 251
Total Acidity mgKOH/g 0.10 max 0.01
Evaporation loss 6.5 hrs
@150°C % m 20 max 10
Relative density @ 15.6/15.6°C Report 0.850
Pourpoint °C –55 max Below –55
Table continuedNOTES
The AeroShell Book
Edition 18 2003
193
Hydraulic Fluids
www.shell.com/aviation
192
Hydraulic Fluids
PROPERTIES MIL-PRF-83282D TYPICAL
Low temperature stability
72 hrs @ ?40°C Must pass Passes
High temperature stability
100 hrs @ 205°C Must pass Passes
Gravimetric Filtration, mg/100ml 0.3 max 0.2
Filtration time minutes 15 max Less than 15
Particle Count, Automatic, per Lt
5 to 15 μm 10000 max 1331
16 to 25 μm 1000 max 190
26 to 50 μm 150 max 55
51 to 100 μm 20 max 4
>100 μm 5 max 0
Water content ppm 100 max 82
Foam resistance ASTM Seq 1 Must pass Passes
Flame propagation cm/s Must pass Passes
Rubber swell, NBR-L % 18 to 30 Passes
4-Ball Wear, 1 hr @ 75°C
scar dia, mm
1 kg load/1200 rpm 0.21 max 0.18
10 kg load/1200 rpm 0.30 max 0.24
40 kg load/1200 rpm 0.65 max 0.50
Oxidation & corrosion stability
168 hrs @ 121°C
– metal weight change Must pass Passes
– viscosity change @ 40°C % 10 max Less than 10
– change in acidity mgKOH/g 0.2 max Less than 0.02
Flammability Must pass Passes
A viscosity/temperature curve is shown at the end of this section.
上一產品:AEROSHELL SSF AND LGF/起落架液壓油Hydraulic Fluids
下一產品:AEROSHELL CALIBRATING FLUID 2
版權所有:東莞市創億嘉潤滑油有限公司   粵ICP備19160599號
工業齒輪油生產廠家,想了解批發價格,用途,哪個牌子好,品牌哪家好請聯系我們.
工業潤滑油
主站蜘蛛池模板: 日本公乱妇视频 | 99久热只有精品视频免费观看17 | 国产成人刺激视频在线观看 | 天天操精品视频 | 国产高清在线观看 | 欧美性色黄大片四虎影视 | free性丰满hd性欧美人体 | 99re在线视频观看 | 亚洲国产在线视频精品 | 免费国产好深啊好涨好硬视频 | 日本高清在线播放 | 国产盗摄wc女厕所 | 日韩欧美高清视频 | 奇米网狠狠网 | caoporen97免费公开视频 | 女明星放荡高h日常生活 | 日本无翼乌漫画 | 爱爱小说漫画 | 亚洲精品视频久久 | 猫扑俩性 | 龟甲情感超市全文阅读 小说 | 免费看隐私美女 | 国产成人lu在线视频 | 被夫上司侵犯了中文字幕 | 俄罗斯海滩厕所偷窥 | 2022最新国产在线不卡a | 日本综合在线观看 | 亚洲欧美日韩综合在线播放 | 韩国www| 俄罗斯13一14处出血视频在线 | www.日本免费 | 边摸边吃奶边做爽gif动态图 | 无码日韩精品一区二区免费 | 久久亚洲精品AV成人无码 | 精品成人在线 | 爱爱调教 | 欧美日韩亚洲国内综合网俺 | 欧美日韩在线一区 | 无码日韩精品一区二区免费 | 午夜私人影院在线观看 视频 | 国产日韩一区二区 |